Rexroth speedreducer GFT60W3B119-A2FE80/A2FE107/A2FE90/A2FE125

a - Effective Center Location4:-19.3 mm; Cage Type:Stamped Steel; db - Cone Backface Backing Diameter:156 mm; da - Cone Frontface Backing Diameter:153 mm; WPD:222 mm; C1 - Dynamic Radial Rating (1 million revolutions)6:654000 N; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:105000 N; G2 - Heat Generation Factor (Rib-Roller End):87.9; d:130 mm; Cone Part Number:KJH429148;

Number of Raceway Ring Rows:Single Row; B:41; Preload Mark:CM; Type:Ball; D:180; Precision:Grade 0; Seal, Shield Symbols:ZZ; Types:16**/6*** series; Size Standards:Metric System; Rolling Element Material:Steel;

Number of Raceway Ring Rows:Single Row; B:41; Preload Mark:CM; Type:Ball; D:180; Precision:Grade 0; Seal, Shield Symbols:ZZ; Types:16**/6*** series; Size Standards:Metric System; Rolling Element Material:Steel;

Inventory:0.0; Fatigue limit load, Cu:34.7 kN; r1s min:3 mm; B:48 mm; Nlim (grease):3,000 rpm; Characteristic cage frequency, FTF:0.39 Hz; D:200 mm; Mass (without HJ ring):7.87 kg; Weight / Kilogram:7.87; Minimum Buy Quantity:N/A;

H:69.9 mm; L:150 mm; A:68 mm; T max.:200 °C; s1:53.2 mm; J:114 mm; Designation of housing:PA212N-; L1:52 mm; d:60 mm; d1:82 mm;

J:95 mm; H:33.3 mm; N1:19 mm; L:127 mm; A:38 mm; T min.:-20 °C; H1:15 mm; H2:65 mm; Designation of housing:P204-; Designation of bearing:ES204-12G2T20;

Surface Treatment:No; Stroke:No; Bearing Unit, Type:Take-Up Type; Unit, Type:Insert Bearing Unit; Fit:J7; Basic Load Rating, Static Rating(N):21300; Unit Body Material:Cast Iron; Basic Load Rating, Dynamic Rating(N):34100; Surface Treatment:No; Stroke:No;

D:32; Inner/Outer Ring Material:Steel; Size Standards:Metric System; Basic Dynamic Load Rating(N):4750; B:9; Preload Mark:/GN; Load Direction:Radial; Rolling Element Material:Steel; Bearing Style:Open Type; Types:Angular Ball Bearing;

Number of Raceway Ring Rows:Double Row; Basic Dynamic Load Rating(N):8200; Outer Ring Shape:Flat; Types:Bearing for the main; Type:Angular Contact Ball; Max. Allowed rpm(rpm):21000; Load Direction:Radial; Preload Mark:/GN; Rolling Element Material:Steel; Specifications/Environment:Standard;

Surface Treatment:No; Stroke:No; Bearing Unit, Type:Take-Up Type; Unit, Type:Insert Bearing Unit; Fit:J7; Basic Load Rating, Static Rating(N):21300; Unit Body Material:Cast Iron; Basic Load Rating, Dynamic Rating(N):34100; Surface Treatment:No; Stroke:No;

Surface Treatment:No; Stroke:No; Bearing Unit, Type:Take-Up Type; Unit, Type:Insert Bearing Unit; Fit:J7; Basic Load Rating, Static Rating(N):21300; Unit Body Material:Cast Iron; Basic Load Rating, Dynamic Rating(N):34100; Surface Treatment:No; Stroke:No;

H:69.9 mm; L:150 mm; A:68 mm; T max.:200 °C; s1:53.2 mm; J:114 mm; Designation of housing:PA212N-; L1:52 mm; d:60 mm; d1:82 mm;

H:33.3 mm; Designation of housing:PG204N-; B:34 mm; Weight:0.67 kg; d1:32.4 mm; T min.:-20 °C; C0:6.65 kN; A1:20 mm; S:17 mm; H2:64 mm;

a - Effective Center Location4:-19.3 mm; Cage Type:Stamped Steel; db - Cone Backface Backing Diameter:156 mm; da - Cone Frontface Backing Diameter:153 mm; WPD:222 mm; C1 - Dynamic Radial Rating (1 million revolutions)6:654000 N; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:105000 N; G2 - Heat Generation Factor (Rib-Roller End):87.9; d:130 mm; Cone Part Number:KJH429148;

Dimension L:10.0 in; Bearing - Housing - Seal:HSM155BRH; Cr - Dynamic Load Rating:233127 lbf; Ca - Axial Load Rating:15602 lbf; Bearing UPC:013992056283; Shaft Size:155 mm; Dimension V:0.3 in; Dimension N:19.502 in; Note:This product line wa; Dimension R:22.6 in;