Bearing 850A/834D+X1S-850A Timken

Diameter (mm)(mm):40; Size Unit:mm; Material:52100 Steel; Size Unit:mm; Material:52100 Steel; Days to Ship:6 Days;

H:80 mm; T max.:100 °C; B1:44.3 mm; L:140 mm; C0:7.88 kN; Designation of housing:PH205-; A1:24 mm; d:25.4 mm; T min.:-20 °C; N:13mm;

J:80 mm; Z:60 mm; Designation of housing:PA207N-; Dz:80 mm; Recommended tightening torque for set screw:8 Nm; Weight:1.56 kg; H2:95 mm; Designation of open end cover:SCOU207-21; T min.:-20 °C; B:42.9 mm;

Recommended tightening torque for set screw:16.8 Nm; N:18mm; Designation of housing:FE212-; C:52.5 kN; S:25.4 mm; G:R1/8"; C0:32.8 kN; A1:16 mm; d:57.15 mm; L:175 mm;

Diameter (mm)(mm):40; Size Unit:mm; Material:52100 Steel; Size Unit:mm; Material:52100 Steel; Days to Ship:6 Days;

H:80 mm; T max.:100 °C; B1:44.3 mm; L:140 mm; C0:7.88 kN; Designation of housing:PH205-; A1:24 mm; d:25.4 mm; T min.:-20 °C; N:13mm;

rs min:1.5 mm; Static load, C0:148 kN; D1:89.7 mm; Characteristic inner ring frequency, BPFI:10.38 Hz; Y2:4.39; d2:66 mm; ra max:1.5 mm; k:3 mm; d:55 mm; B:25 mm;

N1:11 mm; End Cover1:EC512-610; Max Grease Speed:5000; G:M12; A1:60 mm; Shaft Diameter da:50 mm; H:113.00 mm; H1:60.0 mm; J1:34 mm; C0 Static Load Rating:118;

d1:82 mm; Recommended tightening torque for set screw:16.8 Nm; N1:32 mm; T max.:100 °C; d:61.91 mm; A:64 mm; H1:130 mm; N:35mm; T min.:-20 °C; L1:119 mm;

J:80 mm; Z:60 mm; Designation of housing:PA207N-; Dz:80 mm; Recommended tightening torque for set screw:8 Nm; Weight:1.56 kg; H2:95 mm; Designation of open end cover:SCOU207-21; T min.:-20 °C; B:42.9 mm;

A1:11 mm; s1:11 mm; C0:4.78 kN; B:22 mm; Weight:0.38 kg; T min.:-20 °C; A2:26 mm; H1:31 mm; G:M6x1; A:20 mm;

Number of Bearings:Double; Shape:Flange Type; Shape:Flange Type; Seals:VV (Non-Contact Rubb; Bearing Retained:Yes (with retaining; Bearing I.D. d(mm):10; Bearing Retained:Yes (with retaining; Days to Ship:7 Days; Holder Surface Treatment:Black Oxide Coating; Width T(mm):30;

d:65; Max. Allowed rpm(rpm):7700; Bearing Style:Rubber Sealed; Type:Ball; Number of Raceway Ring Rows:Single Row; Seal, Shield Symbols:LB; Size Standards:Metric System; Rolling Element Material:Steel; Retainer Type:Punching; Load Direction:Radial;

rs min:1.5 mm; Static load, C0:148 kN; D1:89.7 mm; Characteristic inner ring frequency, BPFI:10.38 Hz; Y2:4.39; d2:66 mm; ra max:1.5 mm; k:3 mm; d:55 mm; B:25 mm;

A1:11 mm; s1:11 mm; C0:4.78 kN; B:22 mm; Weight:0.38 kg; T min.:-20 °C; A2:26 mm; H1:31 mm; G:M6x1; A:20 mm;