Bearing 87737/87111 Timken

N1:11 mm; End Cover1:EC512-610; Max Grease Speed:5000; G:M12; A1:60 mm; Shaft Diameter da:50 mm; H:113.00 mm; H1:60.0 mm; J1:34 mm; C0 Static Load Rating:118;

N1:11 mm; End Cover1:EC512-610; Max Grease Speed:5000; G:M12; A1:60 mm; Shaft Diameter da:50 mm; H:113.00 mm; H1:60.0 mm; J1:34 mm; C0 Static Load Rating:118;

B:118; D:460; Load Direction:Radial; d:300; Series:Type B (Standard Typ; Retainer Type:Punching; Rolling Element Material:Steel; Raceway Ring Shape:Self-aligning roller; Size Standards:Metric System; Number of Raceway Ring Rows:Double Row;

Load Direction:Radial; Large-capacity type:E (Large-capacity ty; High-Speed Steel:Standard; Raceway Ring Shape:Cylindrical Roller; Basic Load Rating, Dynamic Rating(N):82500; d:55; Specifications/Environment:Standard; Holder Symbol:No; Outer ring oil hole:Standard; Load Direction:Radial;

N1:11 mm; End Cover1:EC512-610; Max Grease Speed:5000; G:M12; A1:60 mm; Shaft Diameter da:50 mm; H:113.00 mm; H1:60.0 mm; J1:34 mm; C0 Static Load Rating:118;

H:80 mm; T max.:100 °C; B1:44.3 mm; L:140 mm; C0:7.88 kN; Designation of housing:PH205-; A1:24 mm; d:25.4 mm; T min.:-20 °C; N:13mm;

Type:Bearings with Housin; Bearing Part Number:698; Width T(mm):25 ～ 50; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Flange O.D. H(φ):41; Holder Surface Treatment:Not Provided; Housing Material:304 Stainless Steel; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):8;

rs min:1.5 mm; Static load, C0:148 kN; D1:89.7 mm; Characteristic inner ring frequency, BPFI:10.38 Hz; Y2:4.39; d2:66 mm; ra max:1.5 mm; k:3 mm; d:55 mm; B:25 mm;

Type:Bearings with Housin; Bearing Part Number:698; Width T(mm):25 ～ 50; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Flange O.D. H(φ):41; Holder Surface Treatment:Not Provided; Housing Material:304 Stainless Steel; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):8;

d1:82 mm; Recommended tightening torque for set screw:16.8 Nm; N1:32 mm; T max.:100 °C; d:61.91 mm; A:64 mm; H1:130 mm; N:35mm; T min.:-20 °C; L1:119 mm;

H:80 mm; T max.:100 °C; B1:44.3 mm; L:140 mm; C0:7.88 kN; Designation of housing:PH205-; A1:24 mm; d:25.4 mm; T min.:-20 °C; N:13mm;

rs min:1.5 mm; Static load, C0:148 kN; D1:89.7 mm; Characteristic inner ring frequency, BPFI:10.38 Hz; Y2:4.39; d2:66 mm; ra max:1.5 mm; k:3 mm; d:55 mm; B:25 mm;

J:80 mm; Z:60 mm; Designation of housing:PA207N-; Dz:80 mm; Recommended tightening torque for set screw:8 Nm; Weight:1.56 kg; H2:95 mm; Designation of open end cover:SCOU207-21; T min.:-20 °C; B:42.9 mm;

d:65; Max. Allowed rpm(rpm):7700; Bearing Style:Rubber Sealed; Type:Ball; Number of Raceway Ring Rows:Single Row; Seal, Shield Symbols:LB; Size Standards:Metric System; Rolling Element Material:Steel; Retainer Type:Punching; Load Direction:Radial;