SKF YAT 211-200 Insert Bearings Spherical OD

C0 Static Load Rating:887; UPC Code:999999999; Adapter Sleeve1:H2322; H:242 mm; Locating Rings (width x OD):SR200X5.1; A:175.00 mm; Locknut:KM22; Cage Type:EJ; A3:250 mm; J:350.00 mm;

Max operating temperature, Tmax:110 °C; Radial clearance class:CN; Mass:0.08 kg; Characteristic rolling element frequency, BSF:5.49 Hz; rs min:0.6 mm; Characteristic cage frequency, FTF:0.41 Hz; Fatigue limit load, Cu:0.27 kN; Dynamic load, C:10.1 kN; Da max:43 mm; D:47 mm;

d:85 mm; Bearing Weight:0.901 Kg; C0 - Static Radial Rating:52240 N; Bearing Width:22 mm; Contact Angle:15 º; Da - Outer Ring Backing Diameter:122.100 mm; D:130 mm; R - Inner Ring To Clear Radius2:1.0 mm; Limiting Speed (Oil):23280 rpm; Cage Type:CR - Phenolic Outer;

da min:8 mm; Nlim (grease):34,000 rpm; ra max:0.3 mm; Brand:NTN; Mass:0.008 kg; Min operating temperature, Tmin:-60 °C; Max operating temperature, Tmax:130 °C; f0:12.1; Da max:17 mm; Radial clearance class:C3;

Max operating temperature, Tmax:110 °C; Radial clearance class:CN; Mass:0.08 kg; Characteristic rolling element frequency, BSF:5.49 Hz; rs min:0.6 mm; Characteristic cage frequency, FTF:0.41 Hz; Fatigue limit load, Cu:0.27 kN; Dynamic load, C:10.1 kN; Da max:43 mm; D:47 mm;

Weight:0.59 kg; A1:11 mm; d:17 mm; C:12.8 kN; d1:32.4 mm; Z:46.2 mm; Recommended tightening torque for set screw:5.5 Nm; T max.:100 °C; e:15 mm; A2:41.5 mm;

S:11 mm; J:151.5 mm; Designation of open end cover:SCOE209-45; N1:24 mm; Recommended tightening torque for set screw:11.5 Nm; Weight:2.17 kg; L:197.5 mm; B1:43.7 mm; N:14mm; Dz:95 mm;

S:11 mm; J:151.5 mm; Designation of open end cover:SCOE209-45; N1:24 mm; Recommended tightening torque for set screw:11.5 Nm; Weight:2.17 kg; L:197.5 mm; B1:43.7 mm; N:14mm; Dz:95 mm;

Recommended tightening torque for set screw:5.5 Nm; L1:18 mm; B1:43.5 mm; C:12.8 kN; Weight:0.56 kg; T max.:100 °C; E:10 mm; C0:6.65 kN; T min.:-20 °C; H2:64 mm;

Fit:J7; Rolling Element Material:Bearing Steel; RoHS:6; Bearing Inner Dia. Shape:Cylindrical Bore Set; Unit, Type:Insert Bearing Unit; d:50; Days to Ship:Quote; Unit, Type:Insert Bearing Unit; Rolling Element Material:Bearing Steel; Unit Body Material:Cast Iron;

Dimension D:0.25 in; Y1 - Geometry Factor:3.14; Dimension A:0.59 in; Weight:18.000 lb; Shaft Tolerance:0.0020 in; Float:0.083 in; Dimension M:2.37 in; Dimension L Exp:4.04 in; Bearing Number:22215; Eng Internal Radial Clearance - Max:0.0031;

Weight:0.59 kg; A1:11 mm; d:17 mm; C:12.8 kN; d1:32.4 mm; Z:46.2 mm; Recommended tightening torque for set screw:5.5 Nm; T max.:100 °C; e:15 mm; A2:41.5 mm;

Days to Ship:7 Days; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; RoHS:6; Housing Material:1045 Carbon Steel; Shape:Flanged Pilot Type; Seals:VV (Non-Contact Rubb; Type:Bearings with Housin; Volume Discount:Available; Shape:Flanged Pilot Type;

Weight:0.59 kg; A1:11 mm; d:17 mm; C:12.8 kN; d1:32.4 mm; Z:46.2 mm; Recommended tightening torque for set screw:5.5 Nm; T max.:100 °C; e:15 mm; A2:41.5 mm;