Bearing XGB43469S01 SNR

H2:176 mm; H1:33 mm; T max.:200 °C; Recommended tightening torque for set screw:27.1 Nm; L1:105 mm; Weight:11.2 kg; J:260 mm; A1:57 mm; d:63.5 mm; N1:38 mm;

Mass:0.42 kg; D1:63 mm; Max operating temperature, Tmax:120 °C; ra max:1 mm; Static load, C0:92 kN; Characteristic rolling element frequency, BSF:5.75 Hz; da min:42 mm; Nlim:12,000 rpm; b:4.9 mm; Fatigue limit load, Cu:8.65 kN;

Shape:Flanged Pilot Type; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Number of Bearings:Double; Bearing I.D. d(mm):20; RoHS:6; Bearing Retained:No; Holder Surface Treatment:Electroless Nickel P; Flange Shape:Compact Type;

Shape:Flanged Pilot Type; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Number of Bearings:Double; Bearing I.D. d(mm):20; RoHS:6; Bearing Retained:No; Holder Surface Treatment:Electroless Nickel P; Flange Shape:Compact Type;

Number of Bearings:Double; Thickness, Height Indication:T, h Selection; Height H(mm):40 ～ 60; Seals:VV (Non-Contact Rubb; T(mm):45 ～ 50; Shape:Bottom Mount; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6204; Bearing Retained:No;

Y - ISO Factor3:0.81; r - Cup Backface To Clear Radius1:0.130 in; D:9.0000 in; Design Units:Imperial; Cg - Geometry Factor:0.142; Series:HM926700; C - Cup Width:1.5000 in; Da - Cup Frontface Backing Diameter:8.64 in; e - ISO Factor2:0.74; Db - Cup Backface Backing Diameter:7.87 in;

A1:10 mm; Designation of housing:FE204-; A2:37.3 mm; T min.:-40 °C; e:19 mm; L:86 mm; G:R1/8"; T max.:100 °C; Recommended tightening torque for set screw:5.5 Nm; s1:15.5 mm;

H2:176 mm; H1:33 mm; T max.:200 °C; Recommended tightening torque for set screw:27.1 Nm; L1:105 mm; Weight:11.2 kg; J:260 mm; A1:57 mm; d:63.5 mm; N1:38 mm;

Shape:Flanged Pilot Type; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Number of Bearings:Double; Bearing I.D. d(mm):20; RoHS:6; Bearing Retained:No; Holder Surface Treatment:Electroless Nickel P; Flange Shape:Compact Type;

Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; RoHS:6; Shape:T-Shaped; Lateral Width L(mm):58; Seals:DD (Contact Rubber S; Bearing Material:[Steel] Steel; Height H(mm):20 ～ 40; Bearing Retained:No; Number of Bearings:Double;

Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; RoHS:6; Shape:T-Shaped; Lateral Width L(mm):58; Seals:DD (Contact Rubber S; Bearing Material:[Steel] Steel; Height H(mm):20 ～ 40; Bearing Retained:No; Number of Bearings:Double;

T min.:-20 °C; B:31 mm; H2:62 mm; C:12.8 kN; C0:6.65 kN; G:M6x1; Z:17 mm; E:13 mm; H:30.2 mm; Recommended tightening torque for set screw:3.7 Nm;

Reference Thermal Speed Rating (Oil)7:430; C0 - Static Radial Rating:10300000 N; Y2 - ISO Factor6:2.32; B - Outer Ring Width:218.000 mm; B - Inner Ring Width:218 mm; Reference Thermal Speed Rating (Grease):390; r - Outer Ring To Clear Radius2:5.000 mm; R - Inner Ring To Clear Radius1:5.000 mm; Design Unit:METRIC; Y0 - ISO Factor4:2.37;

Mass:0.42 kg; D1:63 mm; Max operating temperature, Tmax:120 °C; ra max:1 mm; Static load, C0:92 kN; Characteristic rolling element frequency, BSF:5.75 Hz; da min:42 mm; Nlim:12,000 rpm; b:4.9 mm; Fatigue limit load, Cu:8.65 kN;

Flange Shape:Square Type; Bearing I.D. d(mm):17; RoHS:6; Seals:ZZ (Double Shield); Flange O.D. H(φ):60; Number of Bearings:Double; Type:Bearings with Housin; Days to Ship:7 Days; Shape:Flange Type; Width T(mm):40;