TIMKEN SAF 22534 Pillow Block Bearings

Machining:Oil-free type; Accessory:No Cover; Rolling Element Material:Bearing Steel; Diameter series symbol:Used for Light load; Rolling Element Material:Bearing Steel; Unit, Type:Insert Bearing Unit; B:105; Bearing Unit, Type:Pillow Type; Basic Load Rating, Dynamic Rating(N):34100; Unit Body Material:Cast Iron;

Number of Bearings:Double; Height Indication:Height Configurable; Number of Bearings:Double; Housing Material:1045 Carbon Steel; Bearing Material:[Steel] Steel; Bearing Retained:No; Days to Ship:8 Days; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6904; Shape:T-Shaped;

A1:9.5 mm; S:6.5 mm; L:57 mm; T min.:-40 °C; Recommended tightening torque for set screw:5.5 Nm; G:M6; d1:27.2 mm; A2:39.1 mm; Designation of housing:FLE203-; d:17 mm;

WPD:198.7 mm; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:40200 lbf; Aa - Cage-Cone Backface Clearance:3.8 mm; C1 - Dynamic Radial Rating (1 million revolutions)6:396000 N; B - Cone Width:40.000 mm; C90 - Dynamic Radial Rating (90 million revolutions)5:103000 N; R - Cone Backface To Clear Radius3:3.050 mm; G1 - Heat Generation Factor (Roller-Raceway):252; Cg - Geometry Factor:0.107; db - Cone Backface Backing Diameter:140 mm;

A1:9.5 mm; S:6.5 mm; L:57 mm; T min.:-40 °C; Recommended tightening torque for set screw:5.5 Nm; G:M6; d1:27.2 mm; A2:39.1 mm; Designation of housing:FLE203-; d:17 mm;

G:R1/8"; L:80 mm; s1:34.1 mm; e:19 mm; Weight:0.88 kg; S:18.2 mm; J:116.5 mm; A2:49.1 mm; d1:44.1 mm; A1:12 mm;

s1:24.2 mm; T max.:100 °C; N:11mm; Designation of housing:PLE204N-; d:20 mm; T min.:-20 °C; L:126.5 mm; A1:22.5 mm; C0:6.65 kN; Designation of bearing:ES204G2;

G:R1/8"; L:80 mm; s1:34.1 mm; e:19 mm; Weight:0.88 kg; S:18.2 mm; J:116.5 mm; A2:49.1 mm; d1:44.1 mm; A1:12 mm;

s1:24.2 mm; T max.:100 °C; N:11mm; Designation of housing:PLE204N-; d:20 mm; T min.:-20 °C; L:126.5 mm; A1:22.5 mm; C0:6.65 kN; Designation of bearing:ES204G2;

G:R1/8"; L:80 mm; s1:34.1 mm; e:19 mm; Weight:0.88 kg; S:18.2 mm; J:116.5 mm; A2:49.1 mm; d1:44.1 mm; A1:12 mm;

Material Symbol:No; Retainer Type:Punching; Specifications:Standard; Symbol of Bearing Ring Shape:No; Combination symbol:No; Basic Load Rating, Dynamic Rating(N):86500; Load Direction:Radial; Inner/Outer Ring Material:Steel; Spacer, Sleeve symbol:No; Specifications:Standard;

G:R1/8"; L:80 mm; s1:34.1 mm; e:19 mm; Weight:0.88 kg; S:18.2 mm; J:116.5 mm; A2:49.1 mm; d1:44.1 mm; A1:12 mm;

H:33.3 mm; d:23.81 mm; J:104.2 mm; Z:16.5 mm; S:14.3 mm; L:139 mm; G:M6x1; T min.:-40 °C; Designation of housing:PLE205N-; C:14 kN;

Shaft Size:105 mm; Dimension T:16.3 in; Dimension R:1.4 in; Bearing Type:Split Cylindrical Re; Tensioning Unit Type:Tension Type; Dimension P:0.9 in; Support Type:Take-Up; Dimension X:1.4 in; Ca - Axial Load Rating:3596.90 lbf; Dimension B:8.0 in;

H:33.3 mm; d:23.81 mm; J:104.2 mm; Z:16.5 mm; S:14.3 mm; L:139 mm; G:M6x1; T min.:-40 °C; Designation of housing:PLE205N-; C:14 kN;